Sour Diesel Cartridge

0.0

Sour Diesel Cartridge

0.0

Swell's Sour Diesel is a Sativa cartridge made from Sour Diesel cannabis grown in the Emerald Triangle region of California. 

Description
An incontrovertible  legend, Sour Diesel is certainly one of the most popular sativas of all time.  It is said to be a descendant of ChemDawg, with a uplifting energizing “head” high and no heavy body feeling.  It’s a mainstay of the Sativa family and a strain for the record books.  And with its pungent lemon diesel fuel aroma, what name could be more fitting than “Sour Diesel”?

Contents
The package contains one non-refillable, glass cartridge with integrated mouthpiece.  The cartridge uses industry-standard 510 threads to be compatible with most batteries.

The concentrate is extracted with CO2 using only Sour Diesel feedstock.  The extract is winterized with ethanol to remove fats and lipids, reducing viscosity.  No terpenes, flavorings, or colorings are added.  The product contains only terpenes and flavors in the original Sour Diesel plant.  The flavor will be familiar to aficionados of weed from California's Emerald Triangle.

The cartridge heat element is ceramic, wrapped in cotton, with 1.2 mm holes.  The cotton is used to wick concentrate from the cartridge.  The hole sizes are matched to the viscosity of the concentrate.

The cartridge will perform best (have the correct viscosity) at room temperature.  

Specifications
Concentrate: 500mg
Doses:  Approximately 200
THC content: Range is 56% to 71%
CBD content: Typically 0%

Warranty
3 months.  Cartridge is not refillable.  If cartridge fails under normal use, the dispensary at which product is sold will confirm product is defective, and replace the product.

Ingredients
* Strain-specific organic cannabis: Sour Diesel (Sativa)
* Each cartridge contains a single strain of cannabis.  Testing confirms that no pesticides are detectable (or product is discarded).
* Cannabis oils are extracted with CO2 (carbon dioxide) 
* Ethanol is used to precipitate fats and lipids after the extraction process.  Testing confirms that ethanol solvent is removed prior to filling of cartridges (or product is discarded), consistent with State health and safety regulations

Laboratory Testing
Testing occurs at four stages in the manufacturing process.  

1. First, harvested plant material is tested before they arrive at the facility.  
2. Second, leaves from the plants are placed in an acetone bath to concentrate the pesticides, and the bath is tested.  
3. Third, the concentrate that results from CO2 extraction is tested.  
4. Fourth and finally, filled cartridges are removed from the finished product assembly line are opened and tested.  

All test results of finished products are recorded and available for inspection on the Swell web site.  Consumers can see detailed test results by visiting Swell.one/test on the Web and entering the 12-digit serial number found on the package.

price: $0